Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Texas

Brick Cleaning in Texas

Brick cleaning for walls, chimneys, steps and patios that removes algae, dirt and efflorescence without eroding mortar. Typical cost $250-$700.

From the free quote to the final rinse, brick cleaning in Texas follows a simple process: inspect, protect, clean, rinse and check.

The right method for the job

Low-pressure wash and masonry cleanersCleaning method

Is it time for brick cleaning?

  • Green or black growth on shaded brick
  • White powdery deposits (efflorescence)
  • Soot on chimneys
  • Mortar haze or paint drips

Where the grime comes from

  • Shade and moisture
  • Salts carried to the surface by water
  • Soot and smoke
  • Sprinkler water hitting the wall

What you can do yourself

  • Brush off dry efflorescence with a stiff brush before wetting it
  • Fix gutters and downspouts that soak the brick
  • Look for cracked or missing mortar before washing

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Eroding mortar joints with high pressure
  • Driving water into old, soft brick
  • Using acid without pre-wetting, which can burn the brick

How we handle brick cleaning

  1. Inspect brick and mortar condition
  2. Pre-wet and protect nearby surfaces
  3. Apply the right masonry cleaner or soft wash
  4. Rinse at low pressure
  5. Check for remaining stains and treat as needed

Brick Cleaning cost in Texas

$250-$700Typical range for a typical brick home front or chimney
2-4 hoursTypical time on site
Every 2-3 yearsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Brick Cleaning in Texas

Mildew and algae are the main reason Texas homeowners wash their siding. Shaded walls can turn green within months, and pressure alone doesn't kill the growth, so we use a soft wash solution that does.

Parts of Texas are exposed to hurricanes and tropical storms. After a storm, washing removes mud, debris and salt spray from siding, screens and walkways. Check for damage first: loose siding, broken screens and roof damage need repair before anyone washes them.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

Much of Texas has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.

Some cities in Texas limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

We cover 685 cities and towns across Texas. Find brick cleaning in your city:

Brick Cleaning: frequently asked questions

How much does brick cleaning cost in Texas?

Brick Cleaning typically costs $250-$700 for a typical brick home front or chimney, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for brick cleaning?

Brick Cleaning is done with low-pressure wash and masonry cleaners. Low pressure and the right solution remove growth and dirt without damaging the surface, and the growth takes longer to come back.

Is brick cleaning safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule brick cleaning?

Every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Texas

Rust Stain Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $150-$500

Patio Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$400

House Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $300-$700

Pre-Paint Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$600

Fleet Washing

On-site washing for company trucks, vans, trailers and equipment, scheduled at your yard.

Typical $150-$800

HOA & Apartment Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $800-$5,000

Pool Deck Cleaning for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $200-$500

Graffiti Removal for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $200-$800

Concrete Sealing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$1,200

Deck Cleaning

Deck washing that removes gray weathering, mildew and slippery growth from wood and composite decks without furring the boards.

Typical $250-$600

Soft Washing for Metal Roofs

Soft wash. Painted metal roofs collect dirt, mildew and oxidation chalk.

Typical $300-$800

Dumpster Pad Cleaning

Degreasing and sanitizing dumpster pads and enclosures to cut odors, pests and slip hazards.

Typical $100-$300

Ready for a cleaner home or business?

Get a free pressure washing quote in Texas. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote