Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Texas

Driveway Cleaning for Pavers in Texas

Pressure wash with a surface cleaner for pavers. Driveway pressure washing that removes dirt, mildew, tire marks and many oil and rust stains for an even, clean finish. Typical cost $150-$400.

The secret to driveway cleaning for pavers is using the right method, not the most pressure. In Texas, we match the cleaner and pressure to the surface so it comes out clean without damage. With pavers, the right approach is pressure wash with a surface cleaner.

The right method for the job

Pressure wash with a surface cleanerCleaning method
Usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possiblePressure

Cleaning solution: A paver cleaner or pre-treatment; efflorescence needs a dedicated cleaner.

Cleaning pavers safely

Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them. Re-sanding the joints, often with polymeric sand, and sealing afterward keeps weeds and ants out and holds the pavers in place.

Avoid: A narrow tip aimed into the joints, which blows out sand and can loosen pavers.

How often: Clean every 1-2 years; reseal every 2-4 years.

When to book driveway cleaning for pavers

  • Dark, blotchy or striped concrete
  • Black mildew along edges and in shaded areas
  • Oil spots and tire marks
  • Rust stains from sprinklers or fertilizer
  • Weeds and moss in cracks and joints

Where the grime comes from

  • Vehicle drips and tire rubber
  • Dirt, pollen and leaves ground in by traffic
  • Mildew in shaded and damp spots
  • Iron in well water or fertilizer leaving rust marks

Safe steps for homeowners

  • Blot fresh oil with cat litter and sweep it up after a day
  • Sweep regularly so leaves don't leave tannin stains
  • Fix leaking vehicles to stop new spots
  • Avoid deicers that contain ammonium nitrate or ammonium sulfate, which damage concrete

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Stripes and swirl marks from using a wand instead of a surface cleaner
  • Etched concrete from a narrow tip held too close
  • Oily wash water running into the street and storm drains
  • Spreading oil around instead of lifting it

How we handle driveway cleaning for pavers

  1. Sweep and inspect the driveway and note stains
  2. Degrease oil spots and pre-treat mildew
  3. Clean the whole surface with a rotary surface cleaner
  4. Detail edges, joints and expansion cracks
  5. Rinse, post-treat and walk the driveway with you

How much does driveway cleaning for pavers cost?

$150-$400Typical range for a typical two-car driveway
1-2 hoursTypical time on site
Once a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for pavers

Serving Texas and nearby towns

Shaded driveways, walkways and pool decks in Texas grow black mildew and algae quickly and can become slippery. Pre-treating the growth before washing, and post-treating after, keeps them clean longer than pressure alone.

Some cities in Texas limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

We cover 685 cities and towns across Texas. Find driveway cleaning for pavers in your city:

Driveway Cleaning for Pavers: frequently asked questions

How much does driveway cleaning for pavers cost in Texas?

Driveway Cleaning for Pavers typically costs $150-$400 for a typical two-car driveway, and usually takes 1-2 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for driveway cleaning for pavers?

For pavers: usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possible. What we avoid: a narrow tip aimed into the joints, which blows out sand and can loosen pavers. We keep the pressure even and controlled, with the right tools for the surface.

Is driveway cleaning for pavers safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule driveway cleaning for pavers?

Clean every 1-2 years; reseal every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Texas

Rust Stain Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $150-$500

Patio Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$400

House Washing for Wood Siding

Soft wash. Painted and stained wood siding grows mildew and loses its finish faster on the shaded and weather-facing sides.

Typical $300-$700

Pre-Paint Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$600

Fleet Washing

On-site washing for company trucks, vans, trailers and equipment, scheduled at your yard.

Typical $150-$800

HOA & Apartment Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $800-$5,000

Pool Deck Cleaning for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $200-$500

Graffiti Removal for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $200-$800

Concrete Sealing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$1,200

Deck Cleaning

Deck washing that removes gray weathering, mildew and slippery growth from wood and composite decks without furring the boards.

Typical $250-$600

Soft Washing for Metal Roofs

Soft wash. Painted metal roofs collect dirt, mildew and oxidation chalk.

Typical $300-$800

Dumpster Pad Cleaning

Degreasing and sanitizing dumpster pads and enclosures to cut odors, pests and slip hazards.

Typical $100-$300

Ready for a cleaner home or business?

Get a free pressure washing quote in Texas. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote